COMPLETE KIT FOR FABRIC RENOVATION AND RESTORATION
Wear, tear, hole... For all types of fabric, classic fabric, velvet, alcantara etc...
theFABRIC RENOVATION KITis a really practical and easy to use kit, both for amateurs and professionals.
Easy to use requires attention and a little patience for a good result.
You have a vehicle on lease or you have to sell your vehicle, it is important to renovate the cigarette holes, or tears inside your vehicle for the presentation of this one.
ANY COLOR fabric renovation kit, you can renovate any hole or tear with this fabric renovation kit. This kit is suitable for renovating any type of fabric: Seat, bench, armchair, sofa, chair, etc.
Carsprowash Team:
Attention too large tears cannot be renovated with this kit, only small repairs of cigarette holes for example the size of a 2 euro coin, or a tear of 2 to 3 cm, you can renovate with this kit the carpet has holes because of the heels, for example 5 cm in maximum diameter, do not wait for the hole to get bigger, act immediately.
2 Kits are at your disposal: The classic kit and the Professional kit
The classic kit contains: (With this kit you can repair between 10 and 20 cigarette holes)
Kit contents:
-7 pots of 5 grams of fiber for fabric (Black, white, brown, green, blue, yellow, red) 7 colors to be able to make any custom color_cc781905-5cde-3194- bb3b-136bad5cf58d_
-1 pot of 10 grams of special fabric glue
-1 jar of 10 grams with a ball for mixing colors
-2 hole filling foams
-1 spray glue
-2 plastic spatulas for putty
-1 Protective mask
-1 pair of black gloves
-1 foldable cutter to prepare the surface
-1 iron spatula with wooden handle to heat the fiber
-1 storage and transport box
- User manual in French and English
The professional kit contains: (With this kit you can repair around 150 to 200 cigarette holes)The professional kit is only available on our siteteam-prowash.com
Ideal for automotive professionals VAT recoverable
Regarding the invoice, it will be sent to you just after your payment and automatically by email, please note your company information at the time of purchase.
Containing:
-3 X 7 pots of 10 grams of fiber for fabric (Black, white, brown, green, blue, yellow, red) 7 colors to be able to make any custom color "That is 21 pots of 10 grams of fiber in all )
-5 pots of 10 grams of special fabric glue
-5 pots of 10 grams with a ball for mixing colors
-3 glue spray
-12 hole filling foams
-10 plastic putty spatulas
-2 Protective masks
-10 pairs of black gloves
-3 foldable cutters to prepare the surface
-2 iron spatulas with wooden handle to heat the fiber
-1 mini iron to heat the repair
-21 fine markers special indelible fabrics to reproduce the original frame (Any color "white included) For example you can reproduce the trace of the white seam, or any kind of design.
-1 professional transport and storage case
- User manual in French and English
Advice for using the classic kit:
1) Before proceeding with the renovation of the seat, thoroughly clean the seat of stains and dust.
2) Work on a clean and completely dry surface
3) If there is fiber coming out of the hole, cut it delicately with the cutter included in order to have the smoothest possible surface
4) If the hole is deep, cut a small piece of foam and wedge it inside the hole without protruding, make sure you can still put some glue in the hole
5) Put the glue in the hole and make it overflow slightly on each side, the glue must be at the same height as the fabric, see a little high above, but slightly because the glue will shrink a little_cc781905-5cde-3194 -bb3b-136bad5cf58d_when it will dry
6) Find the right color for the repair using the color guide, (you can find and download the color guide in the photos above), mix the colors in the mixing pot with the ball, shake everything well to obtain the good color, repeat the operation to obtain the perfect color7) Once you have found the right color, spray a little spray glue in the direction of the hole (exceed slightly) and immediately (before the glue dries >_cc781905-5cde- 3194-bb3b-136bad5cf58d_ gently powder the fiber on the hole, you can go past no problem the fiber will only remain where the glue is
8) Heat the iron spatula with a lighter for about 10 seconds then put the spatula on the fabric by dabbing to bind the fiber with the glue (repeat the operation if necessary) blow off the excess fiber.
Repeat the operation if necessary.
Let it dry well about 2 hours
Information: After renovating the fabric, wait 12 hours before cleaning it or sitting on the hole so that everything is completely dry. Fabric renovation kit, economical repair solution for car seats.
top of page
€36.90 Regular Price
€26.90Sale Price
Les produits
bottom of page