- Fine quality decontamination glove
- A soft shampoo with a neutral pH is enough
- Long life: about 30 vehicles
Description
Fine Decontamination Glove (clay mitt) is a revolutionary alternative to the traditional decontamination gum (clay bar).
The decontamination step is essential before a varnish correction or before applying a protective wax.
It removes water stains, fresh tree sap fresh, ferrous particles and other surface contaminants_cc781905-5cde-3194-bb35b586d_deposed on varnish, glass, metal...
This alternative to the clay bar has 3 major advantages:
- it does not require a clay lubricant (claylube), a neutral pH soft shampoo is sufficient
- it has a very long lifespan (about 30 vehicles)
- it saves lot of time during the decontamination step
The decontamination glove can be used on the bodywork as well as on the windows, headlights and rims.
Once the surface is decontaminated, it becomes smooth and shiny.
The decontamination glove (clay mitt) Fine was designed to remove light contamination.
Decontamination has never been so easy and economical!
Dimensions: 21cm X 15cm
Important
When using the glove for the first time, do the windows first in order to run in the glove.
After any decontamination with a glove, it is advisable to carry out a polishing.
Usage tips
Use
Wash the vehicle well and rinse it, no need to dry it
Immerse the decontamination glove in a bucket containing neutral pH soft shampoo
Pass the glove on the microfiber side over the item to be treated in order to distribute the shampoo on the surface
Immerse the decontamination glove again in the bucket with the shampoo then pass the glove on the decontamination side (grey) over the element to be treated in rectilinear movements .
Do not hesitate to reapply shampoo if the surface runs out of shampoo.
Use our XTREM GOLD type concentrated shampoos
Once the element has been treated, rinse the 2 sides of the glove in the rinsing bucket then move on to the next element.
Once the vehicle is finished, rewash the vehicle with the remaining shampoo, rinse it and then dry it with a microfiber scratch-resistant microfiber dryer (ex: Fireball Pin Towel).
Important
When using the glove for the first time, do the windows first in order to run in the glove.
Interview
Once the decontamination is finished, rinse both sides of the glove thoroughly with clear water.
